
AJA HD Miniature Digital Down Converter HD 10 MD 3
HD-SDI zu SDI / Analog (RGB / YUV / YC / Composite über DIP-Schalter einstellbar)
NEU - Netzteil im Lieferumfang.
Features des AJA Downconverter HD10MD3 :
- Low-Cost Broadcast-Quality 10-bit HD to SD Downconverter
- Multi-Standard HD-SDI or SDI Input
- 2 Equalized Loop-Thru HD-SDI/SDI Outputs
- SDI and Component/Composite Analog Outputs
- 3/2 Pulldown for 23.98/24 Hz p/psf inputs
- Full 10-bit Data Path, Multi-point Interpolation
- Configurable for 16:9 or 4:3 Monitors
- Letterbox and Crop Modes
- 4:3 Safe-Zone Graticule
- Passes 8 Ch embedded Audio, 4 Ch on Downconvert
- 5-18VDC power
- External Dip Switch Configuration
The HD10MD3 is a miniature digital downconverter for converting HD-SDI video to broadcast-quality standard definition SDI and analog component/composite video. The HD10MD3 uses a full 10-bit data path and multi-point interpolation to produce excellent quality down-converted video. In addition, the HD10MD3 converts 23.98/24Hz 1080psf/p to 59.94Hz output video using the standard 3:2 pulldown technique. If present, the HD10MD3 will use RP-188 timecode to set the 3:2 pulldown cadence. The output can be formatted for either 4:3 or 16:9 standard definition monitors. For 4:3 monitors both Letterbox and Crop modes are supported. 8 Ch embedded audio is passed to the SDI output. The HD10MD3 is also dual-rate in that SDI inputs will also pass to the SDI and analog outputs.
Technische Daten des AJA Downconverter HD10MD3 :
Formats: 1080i 50 / 59.94 / 60 Hz
1080p / psf 23.98 / 24 / 25 / 29.97 / 30 Hz
720p 23.98 / 24 / 25 / 29.97 /30 /50 / 60 Hz
(Automatic Configuration)
Inputs: HD-SDI or SDI SMPTE 259 / 292 / 296, 10-bit, BNC
Outputs: SDI, SMPTE 259M, 10-bit, BNC
YPbPr - SMPTE, EBU-N10, Betacam
RGB, NTSC, PAL, YC (S-Video), 10-bit
(3 x BNC)
Downconversion: Multi-point interpolation, 10-bit processing
3:2 conversion for 23.98/24p/psf inputs
Frequency Response: Y +0, -.5db to 30 MHz
C +/- .25db to 15 MHz
User Controls: (External Dipswitch)
Output Video Format
4:3/16:9 Monitor Select
Letterbox/Crop
Pedestal (Output)
4:3 Safe-Zone Graticule Overlay
Size: 5.8” x 3.1” x 1” (147 x 79 x 25 mm)
Power: 5 - 18 V DC, 5 Watt
Requires Power Supply (Netzteil NICHT im Lieferumfang)
Optional als Zubehör für den AJA Down Converter HD 10 MD 3 lieferbar:
AJA DWP-U Netzteil (AC 100-240Volt -> DC 5 Volt Ausgang)
AJA PWR CABLE Anton Bauer D-TAP Kabel ( D-TAP Stecker auf 2 x AJA D5/D10 Buchse)
AJA RMB Rack Montagebügel (D und H Serie, für ein AJA Converter)
AJA RMB-10 Rack Montagebügel (D und H Serie, für zehn AJA Converter)
Leider sind noch keine Bewertungen vorhanden. Seien Sie der Erste, der das Produkt bewertet.
Sie müssen angemeldet sein um eine Bewertung abgeben zu können. Anmelden